GRM1555C1H750GA01D Murata MLCC: Applications, Selection and Buying Notes

GRM1555C1H750GA01D Murata MLCC is a surface-mount multilayer ceramic capacitor specified as 75 pF, 50V, C0G/NP0, +/-2%, 0402 MLCC. It is used for local decoupling, rail bypassing, filtering or stable small-signal capacitance depending on dielectric and capacitance value. View the GRM1555C1H750GA01D product detail page or contact In-Fortune for sourcing support. Because the checked page marks this part as Not For New Designs, new BOMs should include a lifecycle and replacement review before approval.

What is GRM1555C1H750GA01D?

GRM1555C1H750GA01D is a Murata Electronics ceramic capacitor in an SMD package. It is a two-terminal, non-polarized passive component, so the practical pinout question is the PCB land pattern, solder fillet and package orientation rather than numbered IC pins. In the checked In-Fortune detail page, the part is listed as 75 pF, 50V, C0G/NP0, +/-2%, 0402 MLCC, with 0402 (1005 metric) package and General Purpose application classification.

The full purchasing model should remain GRM1555C1H750GA01D. Small suffix differences in Murata MLCCs can represent packaging, thickness, voltage class, dielectric behavior or qualification differences, so engineers and buyers should not shorten the request to only capacitance and voltage.

How GRM1555C1H750GA01D is used

Typical circuit role

Most designs use GRM1555C1H750GA01D between a rail and ground near an IC, connector, regulator or load. For bypassing, it supplies short transient current locally while the upstream regulator and power plane respond. For a regulator input or output position, the designer must check regulator stability, minimum effective capacitance and voltage stress rather than relying only on the nominal capacitor value.

C0G/NP0 is normally chosen when capacitance stability, low loss and tight tolerance matter more than high capacitance density. A compact MLCC can lose a meaningful amount of effective capacitance under DC bias. That matters when the part is part of a hold-up budget, switching-regulator loop, impedance target or analog filter. The final design should check Murata data, rail voltage, tolerance, operating temperature and PCB layout conditions.

Layout and assembly considerations

For the 0402 (1005 metric) footprint, keep the current loop short, use a low-inductance ground return and avoid placing the capacitor in high-flex areas near board edges, connectors, screws or depanelization lines. Even though GRM1555C1H750GA01D has no polarity, the pick-and-place file, land pattern, solder volume, tombstoning risk and component height still have to match the released PCB.

Key specifications for GRM1555C1H750GA01D

GRM1555C1H750GA01D selection guide

Select GRM1555C1H750GA01D when the BOM needs 75 pF nominal capacitance, 50V voltage rating, C0G, NP0 dielectric behavior, +/-2% tolerance and 0402 (1005 metric) placement. It can be a useful option for processor decoupling, module rails, sensor power, PMIC rails, compact embedded boards and other circuits where the package size and dielectric behavior fit the design constraints.

Do not select GRM1555C1H750GA01D only because the capacitance matches another capacitor. Confirm derating, DC-bias loss, operating temperature, thickness, soldering profile and customer approval list. If the application needs lower loss, tighter stability or higher temperature margin, review C0G/NP0, X7R, a larger package, a parallel capacitor bank or an automotive-qualified family as appropriate.

If the design references related parts such as GRM155C81E105KE11D, GRT155C81E105KE13D, GRM32ER71H106KA12L, treat each related model as a separate engineering decision. A replacement that looks close in capacitance may still change voltage margin, case size, temperature coefficient, thickness, qualification or long-term availability.

Alternatives and cross references for GRM1555C1H750GA01D

Alternatives are useful for sourcing continuity, but an MLCC replacement is not automatic. Before approving a GRM1555C1H750GA01D replacement, compare datasheet, dielectric, voltage, capacitance, tolerance, package, thickness, land pattern, DC-bias curve, impedance curve, temperature range, qualification level and lifecycle status.

For regulator circuits, rerun the stability and transient calculations after a substitution. For high-speed or RF-adjacent decoupling, check the impedance profile with the rest of the capacitor network. For automotive or customer-qualified builds, confirm qualification documents and the approved vendor list before accepting any change.

Buying notes and sourcing checks

Before issuing an RFQ for GRM1555C1H750GA01D, confirm the complete Murata model, manufacturer name, package, capacitance, rated voltage, dielectric, tolerance, thickness, packaging method, date-code requirement, lot consistency, original factory condition, traceability documents, RoHS/REACH needs, lead time and accepted substitute range. The purchasing request should also include whether alternatives can change package size or dielectric.

Contact In-Fortune to confirm GRM1555C1H750GA01D specifications, packaging suffix and sourcing path. View the GRM1555C1H750GA01D product detail page. Request sourcing support for GRM1555C1H750GA01D. Send an RFQ with your required quantity, application risk and delivery schedule.

GRM1555C1H750GA01D FAQ

Where can I find the GRM1555C1H750GA01D datasheet?

Start with the Murata product data page and the GRM1555C1H750GA01D page on In-Fortune. Final approval data, product notices and packaging details should be confirmed with supplier before production use.

What is the GRM1555C1H750GA01D pinout?

GRM1555C1H750GA01D is a two-terminal, non-polarized MLCC. The pinout check is the PCB footprint, pad geometry, soldering process and mechanical clearance.

What applications fit Murata GRM1555C1H750GA01D?

Typical applications include power-rail decoupling, bypassing, local filtering, regulator input or output capacitor banks, module supply filtering and noise reduction in compact electronics.

Can GRM1555C1H750GA01D replace another capacitor with the same capacitance?

Only after checking voltage rating, dielectric, tolerance, package, thickness, effective capacitance under DC bias, operating temperature, lifecycle and qualification requirements.

Does GRM1555C1H750GA01D have polarity?

No. It is a ceramic MLCC and is normally non-polarized, but assembly still requires the correct footprint and soldering process.

What should procurement confirm before buying GRM1555C1H750GA01D?

Confirm the complete part number, Murata brand, package case, reel format, date code, lot requirement, original condition, compliance documents, delivery schedule and accepted alternative list.

Related internal links for GRM1555C1H750GA01D

• GRM1555C1H750GA01D product detail page
• Ceramic Capacitors category page
• Murata Electronics manufacturer page
• GRM155C81E105KE11D product detail page
• GRT155C81E105KE13D product detail page
• GRM32ER71H106KA12L product detail page

Missing or uncertain data

• Latest Murata approval sheet, product change notice status and customer-specific AVL status: to be confirmed with supplier.
• DC-bias curve, impedance curve and effective capacitance in the final rail condition: to be confirmed against Murata data or measured in the application.
• Exact reel code, standard packing quantity, date-code range and lot requirement for the order: to be confirmed with supplier.
• Any replacement for GRM1555C1H750GA01D must be approved against datasheet, package, land pattern, electrical behavior, lifecycle and certification requirements before use.